View B39202B9818P810_8446368.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw rx 2in1 filter gsm 1800 / gsm 1900 series/type: ordering code: b9818 B39202B9818P810 date: version: july 30, 2013 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 july 30, 2013 b9818 1842.5 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet application n low-loss 2in1 rf filter for mobile telephone gsm 1800 and gsm 1900 systems, receive path (rx) n usable passband: filter 1 (gsm 1800): 75 mhz filter 2 (gsm 1900): 60 mhz n unbalanced to unbalanced operation for both filters n low amplitude ripple n suitable for gprs class 1 to 12 features n package size 1.5 x1.1 x 0.45 mm 3 n moisture sensitive level 3 n rohs compatible n approx. weight 0.003g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) bottom view 10 5 side view top view 1.1 7 9 1 2 3 4 0.075 0.18 0.39 0.49 0.075 0.21 0.21 8 6 0.45 max. 0.18 0.175 1.5 pin configuration n 1 input [ filter 1] n 4 input [ filter 2 ] n 6 output [ filter 2 ] n 9 output [ filter 1 ] n 2,3,5,7,8,10 case ground t.b.d. 2,3,5,10 4 1 8 7 6 9
3 july 30, 2013 b9818 1842.5 / 1960.0 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 1 (gsm 1800) temperature range for specification: t = -20 ?c to +85 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w min. typ. @ 25 ?c max. center frequency f c 1842.5 mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz 1.6 2.5 db amplitude ripple (p-p) da 1805.0 ... 1880.0 mhz 0.9 1.9 db input vswr 1805.0 ... 1880.0 mhz 2.1 2.5 output vswr 1805.0 ... 1880.0 mhz 2.1 2.5 attenuation a 10.0 ... 902.0 mhz 37 42 db 902.0 ... 940.0 mhz 37 42 db 940.0 ... 1705.0 mhz 28 41 db 1705.0 ... 1785.0 mhz 12 24 db 1920.0 ... 1980.0 mhz 17 28 db 1980.0 ... 2030.0 mhz 26 33 db 2030.0 ... 2400.0 mhz 28 39 db 2400.0 ... 2500.0 mhz 32 41 db 2500.0 ... 2775.0 mhz 28 35 db 2775.0 ... 2880.0 mhz 38 52 db 2880.0 ... 3610.0 mhz 28 49 db 3610.0 ... 3760.0 mhz 38 47 db 3760.0 ... 5415.0 mhz 28 34 db 5415.0 ... 5640.0 mhz 28 32 db 5640.0 ... 6000.0 mhz 28 32 db
4 july 30, 2013 b9818 1842.5 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings of filter 1 operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulse. v machine model, 10 pulse input power at gsm 850, gsm 900 p in 15 dbm effective power in the on-state, gsm 1800, gsm 1900 p in 15 dbm duty cycle 4:8 tx bands
5 july 30, 2013 b9818 1842.5 / 1960.0 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function filter 1 (gsm1800) transfer function filter 1 (gsm1800) - wideband
6 july 30, 2013 b9818 1842.5 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts filter 1 (gsm1800) s 11 function s 22 function
7 july 30, 2013 b9818 1842.5 / 1960.0 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics of filter 2 (gsm 1900) temperature range for specification: t = -20 ?c to +85 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w min. typ. @ 25 ?c max. center frequency f c 1960.0 mhz maximum insertion attenuation a max 1930.0 ... 1990.0 mhz 1.5 3.0 db amplitude ripple (p-p) da 1930.0 ... 1990.0 mhz 0.7 2.3 db input vswr 1930.0 ... 1990.0 mhz 1.6 2.2 output vswr 1930.0 ... 1990.0 mhz 1.7 2.2 attenuation a 10.0 ... 1200.0 mhz 35 39 db 1200.0 ... 1510.0 mhz 35 39 db 1510.0 ... 1830.0 mhz 30 35 db 1830.0 ... 1850.0 mhz 26 31 db 1850.0 ... 1890.0 mhz 23 29 db 1890.0 ... 1910.0 mhz 10 14 db 2010.0 ... 2070.0 mhz 6 23 db 2070.0 ... 2400.0 mhz 23 27 db 2400.0 ... 2500.0 mhz 33 38 db 2500.0 ... 3860.0 mhz 26 31 db 3860.0 ... 3980.0 mhz 35 48 db 3980.0 ... 5790.0 mhz 30 44 db 5790.0 ... 6000.0 mhz 30 41 db
8 july 30, 2013 b9818 1842.5 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet maximum ratings of filter 2 operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulse. v machine model, 10 pulse input power at gsm 850, gsm 900 p in 15 dbm effective power in the on-state, gsm 1800, gsm 1900 p in 15 dbm duty cycle 4:8 tx bands
9 july 30, 2013 b9818 1842.5 / 1960.0 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function filter 2 (gsm1900) transfer function filter 2 (gsm1900) - wideband
10 july 30, 2013 b9818 1842.5 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx 2in1 filter data sheet smith charts filter 2 (gsm1900) s 11 function s 22 function
11 july 30, 2013 b9818 1842.5 / 1960.0 mhz saw components saw rx 2in1 filter data sheet please read cautions and warnings and important notes at the end of this document. references type b9818 ordering code B39202B9818P810 marking and package c61157-a8-a19 packaging f61074-v8227-z000 date codes l_1126 s-parameters b9818_lb_nb.s2p, b9818_lb_wb.s2p b9818_ub_nb.s2p, b9818_ub_wb.s2p see file header for port/pin assignment table. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of cer- tain hazardous substances in electrical and electronic equip- ment ("directive") with due regard to the application of exemp- tions as per annex iii of the directive in certain cases. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2013. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
12 july 30, 2013 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B9818P810

	To Download B39202B9818P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .